Size Guide

Determining the correct size for your ring is one of the most important and sometimes complicated steps.

Each country uses its own scale of measurement .

You can check the dimensions in our Size Chart , where all the equivalent diameters and circumferences are listed. We remind you that, to proceed with the purchase, it is necessary to indicate your IT size (Italian measurement system).

If you don't know your size yet, check out this handy guide , where you'll find some useful tips to help you find the perfect ring size for you!

— Method 1: Use a caliper or jewelry mandrel to get an accurate measurement of the inside diameter.

— Method 2: Print out our sizing template , which you can then compare your ring to. Download it here .

— Method 3: Measure the inside diameter of your ring with a ruler , as shown in the image below. It is advisable to repeat this operation at least 3 times , taking a photo of the measured values, to ensure greater precision.

— Method 1: Use a ring sizer or ring gauge . This is the most reliable method, available for free at any goldsmith or jeweler, and will ensure an accurate measurement of your finger.

— Method 2: Print out our free measuring template. In addition to the size comparator mentioned above, you will find a DIY measuring device similar to the one shown in the image. Download the guide from the following link: Download the guide .

— Method 3: Cut a strip of paper about 1 cm high from a sheet of paper. Wrap it around your finger and mark where the two ends meet. Make sure the strip fits snugly over your knuckle and is not too tight, as the paper is flexible, but the ring will not be . Once unfolded, measure the length of the strip; this is your circumference. You can then find your ring size by consulting our size chart or dividing the result by 3.14.